background image

20

 

C

0

Quick Start Guide

This guide is for quick reference only. Please refer 
to the operating section for further information.

How Does the Heater Control Work?

The control allows you to choose when you want heat and at what temperature. 

When using a timer mode (see below), 

Comfort  On

 will display on the home screen to tell you when the heater is 

maintaining  the temperature displayed. 

Comfort Off

 will display when the heater is outside of a timed heating period. 

When 

Manual

Eco

 or 

Frost

 modes are being used the heater will always maintain the temperature shown on the 

home screen.

Set the Time

To set the date and time on the heater, press 

Menu

, then press the 

Enter

 with 

Time / Date

 highlighted. Press   or 

 

until the correct value is shown, then press 

Enter

 to confirm and move on to the next value. Repeat until all details are 

correct, and 

Set

 displays, then press 

Back

The time is automatically adjusted in spring and autumn between Greenwich Mean Time (GMT) and British Summer 

Time (BST).

Set the Temperature

The temperature shown on the display is the room temperature set point. This is the temperature that the 

heater will maintain during heating periods. If the room temperature is above this temperature then the 

heater will not operate. The heater leaves the factory with this temperature set at 21°C which represents a 

typical, comfortable room temperature. If you require a different room temperature then press either   or 

 on the home screen until the display shows the temperature you require.

Child Lock

If you need to lock the controls so that the 

settings cannot be changed then activate the 

Child  Lock

. To lock the controls press and 

hold both the 

Back

 button and 

Enter

 for three 

seconds. 

Child Lock

 will appear at the bottom 

of the screen. To unlock the control repeat the 

action by pressing both the 

Back

 button and 

Enter

 for three seconds.

Press and hold both 

the 

Back

 button and 

Enter

 for three seconds

Timer Modes

Your Quantum heater comes pre-programmed with four timer 

modes. These modes define the periods when the heater will 

operate in 

Comfort On

 mode. The four modes are:

Timer Mode

Description

Out All Day

6 hours heating per day in two periods

Home All Day

9 hours heating per day in one period

Holiday

Set the number of days for which you are 

on holiday

User Timer

Customise times in four periods

20

 

C

0

8

Summary of Contents for QRAD050





















Reviews: