background image

Mode

Timer Mode

Manual

Eco Mode

Frost Protect

Off

Which Timer Mode is Best for Me?

The heater leaves the factory set in 

Out All Day

 mode. If you are out during the day and only require heat in the 

mornings and evenings then this mode will suit your lifestyle and you won’t need to alter anything. If you are in 

during the day then you should select the 

Home All Day 

mode which is a single heating period. The times of these 

modes can be modified, or the 

User Timer

 mode can be used to give you four periods of heating split throughout 

the day. If you are away for an extended period then you can use the 

Holiday

 mode. This allows you to reduce the 

heating during the period that you are away, reverting to the previously selected mode on the day you return.

To choose a timer mode press 

Menu

 followed by 

Enter

 to select 

Mode 

then 

Timer  Mode

. Select the mode 

required by pressing   or   then 

Enter

. For options 

Out  All  Day

Home  All  Day

 and 

User  Timer

, three 

choices are available - 

Select

Preview

 and 

Modify

.

Select

 - Choose this timer option

Preview 

- View the times currently set

Modify

 - Change the times currently set

(Please refer to the operating section of this manual for information on how to modify the programmed times.)

Advance

Sometimes you may be at home when you had not planned to be, or need 

to leave when you had planned to have the heating on. You can change the 

way you use your heating temporarily, this temporary change is achieved by 

using the 

Advance

 function. 

When a timer has been selected, the 

Advance 

function allows you to begin 

the next 

Comfort On

 period early. If the heater is in a 

Comfort Off

 period 

and you want heat – press the 

Advance

 button. If the heater is in 

Comfort 

On

 and you don’t want heat, press the 

Advance 

button and it will go off 

until the beginning of the next 

Comfort On

 period.

Advance Boost

The 

Advance

 button is also used to give a 

Boost 

which provides 

temporary heating for one, two, three or four hours. Press the 

Advance 

button twice to begin a one hour 

Boost

. Continue pressing the 

Advance 

button to enter the longer 

Boost

 periods.

 

 

 

 

 

 

 

21

  

C

0

21 C

0

21 C

0

Comfort On

Main Menu

Date/Time

Mode

Options

Timer Mode

Out All Day

Home All Day

Holiday

User Timer

Out All Day

Select

Preview

Modify

Out All Day

Selected

9

Summary of Contents for QRAD050





















Reviews: