NOTE
: If
EcoStart
(ES) is enabled the heater will begin heating the
room before the start of the heating period to ensure the room is
at the required temperature when the period starts. If disabled the
heater will simply start heating at the start of the
Comfort On
period.
If EcoStart control is disabled, the heater will not operate until the beginning of
the heating period. This should be taken into consideration when setting the
heating periods (See note below and page 17).
In
Holiday
mode the number of days that the room will be unoccupied can be
adjusted together with the required room temperature.
Press and to choose a holiday period between 1 and 300 days, then press
the
Enter
button.
Morning
ON 07:00
OFF 08:30
21 °C
Next
Out All Day
Select
Preview
Modify
< TUE >
Holiday
Active Days
07
Temperature
10 °C
Out All Day
Selected
Constant Heat Modes
To choose a constant heat mode press
Menu
and to select
Mode
and press
Enter
. Then select the required mode, again using the
Enter
button.
Press and to choose a temperature to be
maintained during this period and press the
Enter
button. At the end of the holiday mode
the heater will automatically revert back to
the previously selected programme.
15
