background image

 

5

 

IMPORTANT INSTRuCTIONS

8. 

Ensure that furniture, curtains or other combustible material are 

positioned no closer than 1 metre from the appliance.

9. 

In the event of a fault unplug the appliance.

10. 

Unplug the appliance when not required for long periods.

11. 

Although  this  appliance  complies  with  safety  standards,  we  do 

not recommend its use on deep pile carpets or on long hair type 

of rugs.

12. 

The appliance must be positioned so that the plug is accessible.

13. 

If  the  supply  cord  is  damaged  it  must  be  replaced  by  the 

manufacturer or service agent or a similarly qualified person in 

order to avoid a hazard.

14. 

Keep the supply cord away from the front of the appliance.

 WARNING:

  In  order  to  avoid  overheating,  do  not  cover  the 

appliance. Do not place material or garments on the appliance, 

or obstruct the air circulation around the appliance, for instance 

by curtains or furniture, as this could cause overheating and 

a fire risk.

 WARNING: 

In order to avoid a hazard due to inadvertent resetting 

of the thermal cut-out, this appliance must not be supplied through an 

external switching device, such as a timer, or connected to a circuit 

that is regularly switched on and off by the utility.

 CAuTION: 

Some parts of this product can become very hot and 

cause burns. Particular attention has to be given where children and 

vulnerable people are present. 

Summary of Contents for RBF30-AU













Reviews: