11
HEATER
TIMER
High Temperature & Low Temperature Setting:
Press “HEATER” button for 3 seconds to switch the temperature between °F
and °C
(
Note: The switch function is not available for different batches of fireplaces.
)
The initial default temperature is 72°F. If you need the fireplace runs the low
temperature heating mode, press the HEAT button on the touch panel or remote control
to switch your desired mode (Low temperature mode). (Press the button for the 1st
time, the display window shows that the current heating mode, such as the default
mode is high temperature heating, that is,"HH". Press the button again, the display
shows "LL", that is low temperature heating mode. Press the button for the 3rd time, it
displays OO, that is, the heating mode became OFF mode. The heating mode will be
work on "HH-LL-OO" three modes in cycles. ) If you need to turn off the heating setting,
you can also press the "DOWN" button. If the setting temperature is lower than room
temperature, the heating function cannot be activated. When the heating is turned off,
the fan inside the electric fireplace will work last for 10 seconds before totally stopped.
Timer Setting:
Timer can be set between 0-12 hours. The default timer is 0 hours. You can set it
according needs with "TIMER" on touch panel or remote control. Press "TIMER" button
when the display window shows "00" and flashes, then the timer will change ( From
0.5H-1.0H-1.5H-2H-...-11H-11.5H-12H) when you press. After setting to the required
timer, the indicator light will flash for 10 seconds, then the setting is successful. Then the
display window could back to show the room temperature.
Temperature Increasing Button:
The temperature can be set from 60°F
(
15°C
)
to 97°F
(
36°C
)
.
The default temperature is 72°F (22°C). Press the "UP" button on touch panel or remote
control each time, the temperature will add 1°F/1°C. Press the "UP" button for a long
time, the number of temperature will continually increase until maximum temperature.
After 10 seconds no operation on temperature setting, the display window will back to
the room temperature.
Temperature Decreasing Button:
The temperature can be set from 60°F
(
15°C
)
to 97°F
(
36°C
)
.
The default temperature is 72°F (22°C). Press the "DOWN" button on touch panel or
remote control each time, the temperature will decrease 1°F/1
℃
. Press the "DOWN"
button for a long time, the number of temperature will continually decrease until
minimum temperature (Long-time pressing is not suitable on the remote control).
The red light flashes when setting. After 10 seconds no operation on temperature
setting, the display window will back to the room temperature.
ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM ELM
