Dinel CLM-70, Instruction Manual

5

© 

Dinel, s.r.o.      CLM–70

 •   

CLM–70_–00 Without electrode

; customer makes an electrode himself (types 10 

or 30 only) and attaches it to the electrode holder using M8 threaded 

connection.

 •   

CLM–70_–10 Uncoated stainless steel rod electrode 

for level measurement of 

electrically non-conductive liquids (oils, diesel fuel) and bulk solids (flour, 

sand, cement, granulated plastic materials, etc.). Length 0.2 ... 8 m.

 •   

CLM–70_–11 Coated stainless steel rod electrode (PFA) 

with enhanced resistance 

to penetration (diffusion) of vapours and gases. For level measurement 

of water and other electrically conductive liquids in food processing, 

pharmaceutical, and chemical industries. It can be used temporarily for 

high-temperature  applications  (e.g.  sanitization  with  hot  steam)  or  for 

volatile aggressive liquids, etc. Length 0.2 ... 3 m.

 •   

CLM–70_–12 Coated stainless steel rod electrode (FEP)

, suitable for level measure

-

ment of water and other electrically conductive liquids. Also suitable for 

impure liquids in metallic tanks, concrete sumps, etc. Length 0.2 ... 3 m.

 •   

CLM–70_–13 Semi-coated stainless steel rod electrode (FEP)

 for level measurement 

of  electrically  non-conductive  liquids  in  environments  where  partial 

condensation of vapours on the electrode may occur. Length 0.5 ... 8 m.

 •   

CLM–70_–20 Uncoated stainless steel rod electrode 

with reference tube for level 

measurement  of  unpolluted  and  electrically  non-conductive  liquids  (oil, 

diesel fuel, petrol). Length 0.2–3 m.

 •   

CLM–70_–22 Coated stainless steel rod electrode (FEP) 

with reference tube for level 

measurement of clean electrically conductive liquids (e.g. in plastic and 

glass tanks) and for higher measuring accuracy. Length 0.2 ... 3 m.

 •   

CLM–70_–30 Uncoated stainless steel rope electrode and weight 

for level 

measurement of bulk solids and powders (sand, flour, cement, etc.). The 

rope can also be shortened. Length 1 ... 20 m.

 •   

CLM–70_–31 Uncoated stainless steel rope electrode and coated dynamic anchor 

for measurement of bulk solids in taller silos. Length 1 ... 20 m.

 •   

CLM–70_–32 Fully coated stainless steel rope electrode and weight (FEP rope 

insulation, PTFE weight insulation), 

designed for level measurement of 

water and other electrically conductive liquids. Length 1 ... 12 m.

 •   

CLM–70_–61 Two coated stainless steel rod electrodes (FEP electrode insulation, 

PTFE head) 

for level measurement of aggressive liquids. Length 0.2 ... 2 m.

4 . 

V

ariants

of

sensors

3 . 

r

ange

of

appliCation

The capacitive level meters are suitable for continuous level measurement of various liquids 

and solid materials. The level meters are resistant to any changes in the atmosphere above the 

level (vacuum, overpressure, steam, or dust).