PCU–100 GSM
©
Dinel, s.r.o.
10
GSM module, uses GSM - 2G technology for connection, which, however, in some countries
(especially outside Europe) is gradually turning off.
Many operators are likely to turn off 3G technology first. With such a procedure, the GSM module
will continue to work without problems.
Always check with your operator to see if they support 2G technology, and if not,
choose another that provides 2G technology in your country.
5 . Limitations of the GSM module
The PCU-100 remembers the last value sent from the internal memory. If the GSM connection is
interrupted, the measured values are saved back after the signal is restored and the PCU-100 is
reconnected to the Internet. All measured values will be stored on the dinel.cloud server, even if
the PCU-100 was disconnected from the Internet at the time of measurement and data storage.
003
DATE - TIME
6 . Dinel.cloud web interface
When purchasing the PCU-100 product with a GSM modem, you will receive a login name and
password to the Cloud, which is used to view the measured data from the PCU-100. The portal
is on the ThingsBoard platform and more detailed documentation can also be found at https://
thingsboard.io/docs/.
6.1. Login procedure
1. Open a web browser and enter
www.dinel.cloud
2. Fill in your login details and log in.
FIG. 4: Login screen
You can check the set time in the menu:
server. The time is set in the following menu:
015
CHANGE DATE TIME
008
CONFIGURATION
Summary of Contents for PCU-100 Series
Page 2: ......
