Dingo K9-2 Operation & Maintenance Manual
7
Keep the machine free of grass, leaves, or
other debris build up. Clean up oil or fuel
spillage. Allow the machine to cool before
storing.
Use extra care when handling petroleum
and other fuels. They are flammable and
vapours are explosive.
• Use only an approved container.
• Never remove the fuel cap or add fuel while
the engine is running. Allow engine to cool
before refuelling. Do not smoke.
• Never refuel the machine indoors.
• Never store the machine or fuel container
inside where there is an open flame, such
as near a water heater or furnace.
• Never fill a container while it is inside a
vehicle, car boot, utility tray or any surface
other than the ground.
• Keep container nozzle in contact with the
tank during filling.
Stop and inspect equipment if you strike
anything or hear any strange noise
coming from the machine. If necessary
repair machine before starting again.
Use only genuine replacement parts to
ensure that original standards are
maintained.
This machine is provided with a
maintenance free battery. Do not attempt
to service or adjust battery fluid levels. If
battery will not hold charge replace with a
battery of the same type. In the event that
a battery leaks or case is damaged, handle
using appropriate personal protective
equipment and dispose of in accordance
with local requirements.
WARNING
Hydraulic fluid
escaping under pressure can penetrate
the skin and cause injury.
Keep hands and body away from pin hole
leaks or nozzles that eject high pressure
hydraulic fluid. A small leak can be
dangerous. If you suspect a leak contact a
Dingo Australia Authorised Service
Technician.
Safety and Instruction Decals
It is important to replace any damaged or
missing decals.
Part number: 021-000-071
