Page
18
of
20
Item – Rev(s):
9200000310 & 9200000320 – 102
Inappropriate machine operation may also affect the life of your undercarriage. Take care when
turning on hard surfaces such as concrete or asphalt.
09 – TROUBLESHOOTING
Problem
Possible Causes
Corrective Action
Starter does not
crank engine
Flat battery
Charge battery. Replace if required
Loose/corroded battery connections
Check connections. Repair or replace as
required
Damaged ignition switch
Test ignition switch. Repair or replace as
required
Engine will not start,
hard to start or fails
to keep running
Auxiliary hydraulics lever is engaged
Disengage the auxiliary hydraulics lever
Low fuel level
Add fuel
Air filter dirty / blocked
Clean housing and replace filter
Fuel contamination
Contact Authorised Dealer for repair
Engine loses power
Engine load is excessive
Reduce ground speed
Air filter dirty / blocked
Clean housing and replace filter
Oil level in engine crankcase is low
Add engine oil to correct level
Cooling fins and air passages under
engine blower housing are blocked
Remove obstruction from cooling fins
and air passages
Fuel contamination
Contact Authorised Dealer for repair
Engine overheats
Engine load is excessive
Reduce ground speed
Oil level in engine crankcase is low
Add engine oil to correct level
Cooling fins in the radiator are blocked
or damaged reducing air flow
Clean or replace radiator as required
Abnormal vibration
Engine mounting bolts are loose
Tighten engine mounting bolts
Engine mounts are broken
Replace engine mounts
Machine does not
drive
Hydraulic fluid level low
Add hydraulic oil to correct level
Traction pump drive coupler is loose or
broken
Contact Authorised Dealer for repair
Pump and/or wheel motor is defective
or damaged
Contact Authorised Dealer for repair
Control valve is defective or damaged
Contact Authorised Dealer for repair
Relief valve is defective or damaged
Contact Authorised Dealer for repair
