TPW
46
USER_MANUAL_ENG_TPW_4_R1
MESSAGE
DESCRIPTION
SOLUTION
BUSY
Another printout is already in
progress
Wait for the printout in progress to be finished and
try again.
UNSTAB
The weight is unstable
Check the weighing filter.
If the support surface is subjected to vibrations from
machinery or moving vehicles, move the scale onto
another surface and try again.
low
e net or gross weight is negative
or insufficient for printing
Add weight and try again.
un.over
Underload or overload
(------ o
------)
Completely unload the scale, making sure ∆ lights
up. Load the weight on again and try again.
no.0.unS
The scale was not unloaded
after the last printing
Completely unload the scale, making sure
lights up. Load the weight on again and try again.
err.mot
The weight is unstable
Wait for stability (the light) and try again.
Error
In pieces counting mode, the
weight is insufficient for proper
sampling.
Add more pieces and try again.
Tilt
Angle error.
Move the pallet truck to a flat surface and try
again.
Error messages
This publication, or portions thereof, may not be duplicated without written permission from the Manufacturer. All information contained in this manual is based
on the data available at the time of its publication; the Manufacturer reserves the right to make changes to its products at any time without notice and without
incurring any penalty. We therefore recommend that you always check for any updates.
The individual in charge of pallet truck operation must ensure that all safety regulations in force in the country of use are applied, ensuring that the appliance is
used in accordance with the purpose it is intended for and to avoid any danger for the user.
The Manufacturer declines any liability arising from any weighing operation errors.