English 3
Dino-Lite User manual
2. Please use a USB 2.0 port that is fully powered. Some USB ports
on portable computers do not supply sufficient power.
3. The driver will be automatically installed. Please WAIT until
the notification appears: ‘Device driver software installed
successfully’.
4. Now start DinoCapture 2.0 by double clicking on the desktop icon.
5. The LED lights should go on and an image should appear in
DinoCapture. If this is not the case, refer to the frequently-
asked-questions (FAQ) on
www.dino-lite.eu
.
Hardware features
1. At the center of the device, the adjustable dial is used to
set the focus. The focus of the image depends on the distance
to the object. Once you have focused on the object, you can
read the magnification rate achieved from the number next to
2. The models in the AM/AD 411X series feature a magnification
lock. The magnification lock is particularly useful for repetitive
inspection at a given level of magnification.
3. Dino-Lite models with the letter T in their product name have
a Microtouch function at the cable end of the device. Touching
this sensor will capture the current image or start/stop video
recording (for usb-devices). On the Dino-Lite high speed real
time models the Microtouch sensor can be used to switch the
LEDs on/off (all models) or freeze the image (AM5116 models
only).
4. Models with the letter Z in their product name have a
polarization function, that can be controlled by turning the
adjustable cap.
5. Models with the letter L operate at a longer working distance.
These models only achieve focus at some distance from the
object.
6. The AD and Edge models have exchangeable front covers/
caps. Align the red lines on cap and frontend of the Dino-Lite to
