Dino-Lite AM413T, User Manual

Dino-Lite Handheld Digital Microscope User’s Manual

30

Q&A 

Q1. Why the object cannot be found on the display of digital microscope? 
A:    a. Please check all the connection of all necessary cable and adapter. 
Q2. Why cannot work, when connect to PC? 
A:      a. Check driver installation is completed. 
 

b. The USB cable is connected to Dino-Lite Handheld Microscope and PC USB 
port.    

Q3. How to install driver? 
A:      a. Do not connect USB cable to Dino-Lite Handheld Microscope before driver 

installation. 

b. Place installation CD into CD-Rom driver, select “driver installation”. 

Q4. If USB cable connected to Dino-Lite Handheld Digital Microscope before driver 

installation? 

A:      Remove USB cable from Dino-Lite Handheld Digital Microscope for 5 sec., and 

then plug it back to Dino-Lite Handheld Digital Microscope. 

Q5. How to connect “DinoCapture” ? 
A:      Complete driver installation, connect USB cable to Dino-Lite Handheld Digital 

Microscope, and then Execute “DinoCapture” application procedure. 

Q6. How to uninstall driver ? 
A:      Remove USB cable from Dino-Lite Handheld Digital Microscope, execute 

“uninstall” in application procedure “Dino Digital Microscope”. 

Q7.    When connecting to PC, why the picture is slow or unsmooth?   
A:    a. Probably your PC’s configuration is not sufficient enough. Please check the 
 

        system requirements as mentioned in this User’s Manual.   

b. Probably your PC’s CPU or memory is overloaded by executing too many 
    application software. Try to shut down other application and restart your 
    system to release the memory.   

      c. Probably your system has being attacked by virus, which may     

  dramatically degrade your system’s performance. 

Q8.    What should we do, if Dino-Lite Handheld Digital Microscope is not working 

normally? 

A:      Please reset the system by disconnecting all the cables from Dino-Lite 

Handheld Digital Microscope. Wait for about 5 sec., re-connecting the cables to 
restart.