DINO 105T
52
-
manually operated directional valves
-
check that the valves of the support outriggers and the driving device work properly and
no movements are executed while the spools are in neutral position.
-
rotary adaptor
-
check the adaptor for oil leaks.
-
check the operation and attachment of the rotation stopper.
-
cylinders
-
lower the outriggers to the support position and check the condition of the piston rods
and wiper rings. check the cylinders for external oil leaks.
-
lift the boom to its upper position and check the condition of the piston rod and the
wiper ring.
-
lower the boom and check the condition of the piston rod and the wiper ring of the
platform cylinder.
-
check the condition of the piston rod and the wiper ring of the telescope cylinder.
-
hoses
-
check the hoses for leaks and chafing.
-
pipes
-
check that there are no dents, leaks, trace of corrosion or chafing at the clamps. check
that the pipes are properly fastened.
-
connections
-
check the hose and pipe connections for leaks.
-
inspect thoroughly the electric system
-
check that the control panel boxes are dry, clean and tight.
-
check the condition of the cable connections and their protection against moisture.
-
check the condition and attachment of the limit switches.
-
check tightness of the limit switch lead-throughs.
-
check the connections of the solenoid valves.
-
perform a visual check of all electric wiring.
-
check the condition and cleanliness of the power supply plug.
-
check the condition of the electric motor.
-
check the operation of the fault current safety switch.
-
check the fixing points of the hydraulic cylinders.
-
check the fixing and condition of the outrigger cylinder bearings and pins.
-
check the fixing and condition of the lifting cylinder bearings and pins.
-
check the fixing and condition of the telescope cylinder bearings and pins.
-
check the fixing and condition of the platform cylinder bearings and pins.
Summary of Contents for DINO 105T
