DINO 105T
58
FAULT REMEDY
8. The telescope not operational
Refer to item 4.
Check that the electric valve of the telescope is
not in the open position in the centre.
9. The telescope slowly drifts downwards
The load regulation valve leaks.
For remedy, refer to item 5 (lock valve)
10. The outriggers do not operate though the selector switch is in position 1.
The boom does not rest on the transport support. Drive the boom onto the support.
The electric valve of the boom/outriggers must
not operate (remains in the centre position)
For remedy, refer to item 4
11. The outrigger does not remain in the support position
The load regulation valve on the bottom side
leaks.
For remedy, refer to item 5 (lock valve)
Tightening torque 55 Nm.
12. The outrigger does not remain in the transport position
The load regulation valve on the rod side leaks.
For remedy, see above
11
10
11
10
Summary of Contents for DINO 105T
