Modify PC’s IP Address
6
On the PC, click ‘
Network (or Ethernet) → Properties
’.
1
Double-click ‘
Internet Protocol Version 4 (TCP/IPv4)
’.
2
Select ‘
Use the following IP address
’, and then enter an available IP address
‘192.168.11.XXX’ which is at the same network segment with ‘192.168.11.1’.
3
To log in the Web Management System of the gateway, you need to modify the IP address
of PC first to make it at the same network segment with the gateway.
To log in the Web Management System of the gateway, you need to modify the IP address
of PC first to make it at the same network segment with the gateway.
