DAG3000-112S VoIP Gateway User Manual
6
2
Basic Operations
2.1
Methods to Number Dialing
Dial mobile phone or extension number
Dial the number directly and wait for 3 seconds (Default “
No dial timeout
”);
Dial the number directly and press #.
2.2
Direct IP Calls
The DAG3000-112S gateway allows users to directly call through IP address. Under this circumstance,
the user only needs an analog phone which is connected to a FXS port of the gateway, and calls can
be established without register.
Calls can be established through IP address as long as one of the following conditions is met.
Both the DAG3000-112S and other VoIP device have public IP addresses;
The DAG3000-112S and other VoIP device use private IP addresses of a same LAN;
The DAG3000-112S and other VoIP device can be connected through a router and use public or
private IP addresses (with necessary port forwarding or DMZ).
Operation Process
：
Step1: Pick up the analog phone and
then dial “*47”
;
Step2: Enter the target IP address.
【
Note
】
: No dial tone will be played between step 1 and step 2
Example:
Assume that the target IP address is 192.168.0.160, user need to dial
*47
and
then
192*168*0*160
.
After that
,
press
the “#” key or wait 3 seconds.
Then signaling interaction is completed and ringing
can be heard .
【
Note
】
:You cannot make direct IP calls between two FXS ports of a same DAG3000-112S since they
are using the same IP addresses. Call through IP address is only routed to the default destination port
5060
.
