DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
38
4.7.3 Tel->IP Routing
Figure 4-7-3 Tel to IP Routing
Table 4-7-3 Description of Tel to IP Routing
Figure 4-7-4 Tel to IP routing Modify
Destination
Its specifies destination Port or Port Group
Parameters
Description
Tel -> IP Routing
This item uses to configure incoming call routes which can be used
for receive the calls from the mobile.
Index
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.The route preferentially match the rules which the value
of index is smaller
Description
It describes the route for the ease of identification. Its value is
character string
Source Port
It specifies the Port or Port Group which will receive the calls from
mobile
Source Prefix
All the caller number must match the source prefix. It specifies the
source prefix allow to send call out
Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination Prefix
All the called number must match the destination prefix, the call prefix
indicates the connected number
Any: include anonymous, 0xxxx, 1[2-9]xxxx etc.
0xxxx: consist of some digits such as 015,08,09
1[3-8]6:consist of some prefix, include 136,146,156,166,176, 186
Destination
Its specifies destination IP trunk or SIP server
