DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
7
2
Antenna Connector Mark as digits 0 to 7
3
Network
FE0 and FE1, its default IP address
192.168.11.1
4
Console
RS232 standard,
band rate 115200bps
5
RST
Reset button to restore default IP and password or restore
factory setting.
Restore IP and Password:
hold RST button
3~5 seconds,
RUN LED being ON during this time
Restore factory setting
: Hold RST button 7 seconds,
RUN LED being blink
The appearance of DWG2000F
The appearance of DWG2000G
1.4 Functions and Features
1.4.1 Protocols
Standard SIP;
Simple Traversal of UDP over NATs (STUN);
Point-to-point protocol over Ethernet (PPPoE);
Hypertext Transfer Protocol (HTTP);
Dynamic Host Configuration Protocol (DHCP);
Domain Name System (DNS);
ITU-
T G.711α-Law/μ-Law
、
G.723.1
、
G.729AB;
PPTP available on DWG2000E
1.4.2 System Function
PLC: Packet loss concealment
