DWG2000E/F/G GSM/CDMA VoIP Gateway User Manual
_______________________________________________________________________________
Shenzhen Dinstar Technologies Co., Ltd.
51
Example
To add a remote IP of Softswitch, IP trunk index is 31,
SIP port number “5060”
Figure 4-11-2 IP Trunk Modify
4.11.2 IP Trunk Group
Figure 4-11-3 IP Trunk Group
Table 4-11-2 Description of IP Trunk Group
Example
To add an IP group, s
et IP “10, 14, 17” to IP group 18
Figure 4-11-4 IP Trunk group modify
IP
It is an interworking parameter between the remote Softswitch and the
SIP server. It specifies the IP address of the peer equipment.
Port
It is an interworking parameter between the remote Softswitch and the
SIP server. It specifies the SIP port number of the peer equipment
Keep alive
Send OPTION to Softswitch/IPPBX to detect health status
Parameters
Description
IP Trunk Group
This configuration is optional, and is used to add the IP that have the
same attributes to an IP group. The IP group will referenced by
IP->Tel routing and number manipulation.
Index
It uniquely identifies a route. Its value is assigned globally, ranging
from 0 to 31.
Description
It describes the route for the ease of identification. Its value is
character string
IP
It specifies the IP will add to IP group
