MTG200 Trunk Gateway User Manual
30
Dial plan used for configuring the receiving number, user can configure different prefix number,
these rules can be divided into 5 groups with a dial plan ID, where 0 is the default setting.
Notes
:
1.
In order to ensure each rule can take effect, long matching numbers (prefix) rule dial plan index
value need smaller.
2.
Maximum length is 30, this value is the number of the total length and including the prefix
length.
Click “Add” to add dial plan, configuration page as follow:
Table 2-8-3 Description of Dial Plan
Dial Plan ID
The number to identify a dial plan
Index
Dial plan priority rules take effect in accordance with dial plan index size, and not
according to the maximum number received.
Prefix
Match number, "." representative of any number
Min Length
The minimum receiving Number length (0 to 30). If receiving a number equal to the
minimum length greater than, less than equal to the maximum length, the number will
be used to continue the call. If the maximum length determine the number to receive a
complete, will no longer receive a new number, and immediately began to number
analysis. If there are numbers continue to be received, the system will give up these
numbers.
Max Length
The largest received number length (0 to 30)
2.8.4 Dial Timeout
Figure 2-8-4 Dial Timeout
Figure 2-8-5 Dial Timeout Add
