客户至上
贴心服务
十年专注
铸就品质
Power Connection
Wire Sequence of RJ48 (E1/T1) Cable
6
The E1/T1 ports of MTG1000 trunk gateway are connected with RJ48 cables. A RJ48 cable has two
PINs, and the wire sequence of each PIN is shown as follows
:
1 2 3 4 56 7 8
PIN 1
1 2 3 4 56 7 8
PIN 2
PIN1: orange & white, orange, green & white, blue, blue & white, green, brown & white, brown.
PIN2: blue, blue & white, green & white, orange & white, orange, green, brown & white, brown.
Modify PC’s IP Address
7
On the PC, add an IP address of 192.168.1.XXX, to make the PC at the same network segment with
MTG1000, since the default IP address of FE0 of the trunk gateway is 192.168.1.111.
(1)
On the PC, click “Network
Properties”
.
(2)
Double-click “Internet Protocol (TCP/IPv4)”.
