MTG2000B Trunk Gateway User Manual
88
Copyright @ Dinstar 2011-2021
4.16.3 Signaling Call Test
On the
Signaling Call Test
interface, you can test whether the signaling of a call is
successfully connected. You need to select the source type, trunk type and IP trunk No. of
the call, and enter the calling number and called number. If the signaling of a call fails,
you can find out where errors have occurred through the messages returned in the
Signaling Trace
box.
Signaling Call test is used to help locate the reason for a failed call. It is used to test the
signaling of a
PSTN
->
IP or PSTN
->
IP
call and check whether the connection is normal
or not.
