Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
UC100-1T1S1O User Manual
Copyright©2011-2016 Dinstar
40
address of a host from local-area network; it can also be a string of
IP addresses, for example, 172.16.11.1/15.
LAN Port
The port of LAN host which the accepted or rejected IP address
belongs to
LAN MAC
The Mac of the LAN host twhich the accepted or rejected IP
address belongs to
WAN IP
The IP address that you want UC100 to accept or reject. It is the IP
address of a host from wide-area network; it can also be a string of
IP addresses, for example, 152.16.11.11/19.
WAN Port
The port of WAN host which the accepted or rejected IP address
belongs to
Action
Choose accept ot reject
5.4.4
DHCP Server
If there is a need, you can choose to enable the built-in DHCP server of UC100-1T1S1O to
assign IP addresses to PC or other clients that are in the same local-area network with UC100.
Under this condition, the UC100-1T1S1O gateway works like a router.
Figure 5-31 Enable DHCP Server
Table 5-7 Explanation of Parameters for DHCP Server
Start Address
The start IP address of the address pool to be assigned
End Address
The end IP address of the address pool to be assigned
