Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
UC100-1T1S1O User Manual
Copyright©2011-2016 Dinstar
49
L2TP
：
UC100-1T1S1O works as a L2TP client and is connected to L2TP server.
Figure 5-41 UC100 Works as L2TP Client
Table 5-12 Explanation of Parameters for L2TP Client
Status
Whether to enable the L2TP client function (UC100-1T1S1O works as
L2TP client)
Default Route
Whether to enable default route;
If default route is enabled, data are transmitted between L2TP client
and L2TP server through VPN route; if it is not enabled, data are
transmitted between L2TP client and L2TP server through network’s
outbound route.
Data Encryption
Whether to encrypt data during data transmission
Server Address
The IP address of the L2TP server that assigns account to L2TP client
Username
The username of the account assigned by L2TP server to L2TP client
Password
The password of the account assigned by L2TP server to L2TP client
OpenVPN
：
Allow a single point of VPN to use c
ertificates authenticate itself.
