Error! Use the Home tab to apply
标题
1 to the text that you want to appear
here.Error! Use the Home tab to apply
标题
1 to the text that you want to
appear here.
UC100-1T1S1O User Manual
Copyright©2011-2016 Dinstar
44
Network Capture
On the following
interface, you can capture data packages of the available network ports. You
can also set source IP, source port, destination IP or destination port to capture the packages
that you want.
Figure 5-36 Network Capture
Note: If there are multiple source or destination IP addresses, please use ‘|’ to separate them,
for example, 172.16.115.12|172.16.115.15.
After package capturing is completed, save the captured packages on a computer and then use
a tool to analyze them.
5.4.8
DDNS
If DDNS
（
Dynamic Domain Name Server
）
service is enabled , when the IP address bound to
a domain name changes, the new IP address will be sent to the DDNS, and thus user can visit
the device via the new IP address or domain name and incoming calls can arrive the device
via the domain name.
