5 Configurations on Web Interface
UC100-1
V
1S1O User Manual
Copyright©2011-2016 Dinstar
70
Register to SIP Server
If it is enabled, the FXO trunk will be registered to the SIP trunk
that has been set.
Default is off.
Master Server
The address and port of the master SIP server;
it is generally the IP address of a SIP trunk. Please make
reference to Trunk
SIP section
Slave Server
The address and port of the slave SIP server
Auth Username
The username of this FXO trunk, which is used during register
authentication
Password
The password of this FXO trunk, which is used during register
authentication
From Header Username
Choose the registered username or the true caller ID for the
‘from header’ of the invite message when a call goes out.
Specify Transport
Protocol on Register
URL
Whether to specify transport protocol on register URL.
Expire Seconds
The validity period after the FXO trunk is registered
successfully. When the time expires, the FXO trunk will send
register request to the server.
Default value is 1800s
Retry Seconds
When the FXO trunk fails to be registered, the interval to send
register request;
Default value is 60s
Display
Name/Username
Format
The format to display caller information, including:
Caller ID/Caller ID
Display Name/ Caller ID
Extension/ Caller ID
Caller ID/ Extension
Anonymous
Input Gain
The receiving gain of the FXO port
Output Gain
The sending gain of the FXO port
Impedance
The impedance
（
SLIC
）
matched with phones
FXO Profile
The FXS profile that is selected for this FXS extension
Status
If it is on, this FXO trunk can be used, otherwise, the FXO trunk
is unavailable.
FXO Automatch Impedance
：
Click the
Detection
button, and the UC100-1G1S1O gateway will automatically detect the
most-matched impedance.
