5 Configurations on Web Interface
UC200-2S2O User Manual
Copyright©2011-2018 Dinstar
76
Figure 5-70 IVR Setting
Table 5-33 Explanation of IVR Parameters
Name
The name of the IVR
Menu Tone
Choose a tone as the menu tone. It is generally the default tone
Repeat Loops
If it is set as ‘3’, the call will be hanged up after the IVR has been
repeated for three times
Select Invalid
Times
The times of prompting that the caller has dialed an invalid DTMF digit.
When this value is reached , the call will be hanged up
Select Invalid
Tone
Select ‘Off’ or a tone which prompts that the caller has dialed an invalid
DTMF digit
Destination
Invalid Times
The times of prompting that the destination cannot be reached. When
this value is reached , the call will be hanged up
Destination
Invalid Tone
Select ‘Off’ or a tone which prompts that the destination cannot be
reached
Timeout
If it is set as ‘10’, it means if no DTMF tone is received during 10
seconds, the IVR will be played repeatedly or the call will be hanged up.
The default value is 10 seconds.
