Back
less Boost
er Sea
t
While this booster seat is designed to offer advanced side-impact protection with its
backrest section attached, the seat bottom can also be used alone as a backless booster.
1) Remove seat bottom from backrest section (see page 8).
2) Make sure booster seat is correctly installed (page 9) and
properly positioned on vehicle seat.
3) Properly position child: sitting upright and all the way
back in the booster seat.
4) Fasten seatbelt across child.
5) Make sure seat belt is not twisted and lays flat across
child’s hips, torso and shoulder
.
6) Tighten the seatbelt by pulling the diagonal shoulder belt
portion in the direction of the arrows.
IMPORTANT
: Lap belt position should be as far forward and
as low as possible over child’s pelvis and contacting upper
thighs.
IMPORTANT
: Diagonal seat belt portion should route inside
the lower belt guide closest to the buckle and over child’s
shoulder. It should NOT
be touching the neck.
NEVER position the shoulder belt loosely or under the
child’s arm or behind their back.
WARNING: I
f the diagonal seat belt p
ortion do
es not corr
ectly fit the child
,
then the seat must b
e used with the shoulder belt guide str
ap (page 13) or
with the seatback por
tion attached and prop
erly adjusted t
o fit the child.
12
