diono.com
radian 3QX
30
31
REAR
–
FA
CING
REAR
–
FA
CING
ANTI–REBOUND BAR
WARNING!
ALWAYS
use anti-rebound bar on rear-
facing installs.
DO NOT
USE forward-facing.
1. Place the anti-rebound bar into
the anti-rebound bar slots on
the front of the car seat.
2. Push the anti-rebound bar into
the slots until hearing an audible
"click".
Pull up on the bar to confirm
proper engagement.
To remove the anti-rebound bar
for forward-facing installations,
press the release buttons near the
bar on the outside of the seat and
pull the anti-rebound bar out.
NOTE:
You may need to release
one side at a time.
1
2
REAR-FACING BASE
ALWAYS
use rear-facing base on rear-facing installs
ONLY.
DO NOT
use for forward-facing or booster
mode.
1. Align lower hooks as shown.
2. Insert hooks first and push the
top of the base in until hearing
an audible "click".
Confirm base is locked and
does not move.
To remove, press release buttons
and pull top end outwards to
remove top section. Gently
detach base lower hooks from seat
bottom.
1
2
CLICK
