diono.com
radian 3QX
48
49
FOR
W
ARD–
FA
CING
FOR
W
ARD–
FA
CING
7. Attach LATCH/UAS
connectors to vehicle’s
LATCH/UAS anchors and listen
for audible "click" to confirm
engagement.
LATCH/UAS
strap should lie flat and not be
twisted.
8. Tighten the LATCH/UAS strap.
Press down firmly in the center
of the car seat while tightening
the LATCH/UAS strap.
9. Test for tightness.
Grab the side of the seat with
one hand where the LATCH/
UAS strap is and slide the car
seat side-to-side and front-
to-back. If the seat moves
less than 1 in. (2.5 cm), it is
tight enough. Do not test by
grasping the top or front of the
seat.
7
8
9
10. Tighten the top tether strap.
Push the car seat back while
tightening the tether strap to
remove all the slack.
11. To remove LATCH/UAS strap
from vehicle,
use LATCH/UAS
release on the LATCH/UAS
connectors and pull them off
the anchor bars.
12. To loosen or remove the top
tether,
push in on the grey
button to loosen, then unclip
the top tether.
10
11
12