background image

10. DO NOT operate the induction range if it has been damaged in any manner or 
if the unit malfunctions. Return the unit to the nearest authorized service facility 
for examination or repair.

11. The use of any accessories not recommended by the manufacturer may cause 
injuries.

12. Keep the power cord away from heat.

13. DO NOT place the induction range in, on or near open flames, electric burners, 
heated ovens or other high temperature surroundings.

14. DO NOT heat any sealed cans on the induction range. A heated can may 
explode.

15. DO NOT move the induction range while cooking or when the pan is hot.

16. After the induction range has cooled down, power off at the circuit breaker of 
unplug the  and clean as follows, CERAMIC PLATE: wipe with damp cloth or use 
a mild, non-abrasive cleaning 

solution.

BODY: wipe the control panel with soft cloth or use a mild cleaner.

17. DO NOT use induction range for other than intended use.

18. Power off 

at the circuit breaker or unplug 

when not in use.

19. When storing, DO NOT place any objects on top of the induction range.

20. When using an induction range (smooth top range) for cooking, keep your face 

60cm from the heating areas.

SAVE  THESE  INSTRUCTIONS!!!

Summary of Contents for BK60-E



































Reviews: