FIG.2 Rear Panel View
CHANNEL:
Channel selection switch
RF OUT:
RF signal output
OPERATIONG AND CONNECTION
:
1. Pair to Pair mode
FIG.3 CONNECTION DIAGRAM
1. Connect one SYV-75/RG59 coaxial cable from Modulator (TX) RF OUT into the DVB-T Receiver
Tuner /RF IN.
2. Connect one HDMI cable from signal source into the HDMI input port of TX.
3. Set same channel for TX and Receiver (Detailed setting method reference behind the table).
4. Connect adapter power supply to the TX.
DVB-T TV/
Receiver
DVD/PC/STB
TX
HDMI cable
Coaxial cable