DIR 8818 Instruction Manual Download

Page: 6 / 9

Handle of gas piston

Recover
status

Adjust
status

Handrest adjustment：

See below picture: as per arrow direction, keep

pressing the gas piston and meanwhile press the

handrest to the angle you want. Or it will recover by

opposite method.

The suggestive instructions:

1. This electric massage bed uses a three-wire power cable. Meanwhile it should be inserted into the

three-hole outlet where there is a ground electrode. And it should be assured that it can be connected

to the ground electrode smoothly so that it can prevent people from getting electric shock while

functioning normally.

2. All the plugs, buttons and other components connected to the power cable must not dip in the

water or other liquid.

3. It is forbidden to put your hands, feet, head or other part of the body into the gap while massage

chair is running when you press the manual control panel or the foot control panel.

4. It is prohibited to use when plugs, buttons and other components connected to the power cable

are broken.

5. It should be noticed that the frequency is 6min/h when the motor of this massage chair is used.

6. The maintenances should not be dealt with without official training.

Summary of Contents for 8818





