● Headrest
Adjust the knob B to adjust height of headrest or disassem
-
bly headrest; Adjust the knob A to rotate or turn over the
angle of headrest
● Notice:
Because this bed is work with 3 wire power cables, in order to
making it working properly, it has to insert to 3 holes powder
socket with ground wire.
All plugs, buttons and cables couldn’t be soak in the water
or other liquid.
Press control keys to adjust the height of whole bed. Forbid
putting the hand, foot or head into position ①②③ when using
the foot control to adjust the height of bed, as below picture.
Stop using if plugs, buttons or cables damaged.
Please note that the frequency should be 6 min/h when using
the electric rod of this bed
Only allow to be maintained by professional workers.
PS:After insert headrest , pls take care of the headrest when
raise up the bed , in case basin get damaged .
Knob A
Knob B
