3
THE PHRVR100 ES HRV:
Powerful things can come in a small package!
PHRVR100 ES is a compact HRV specially designed for
small residential and multi-residential applications such as
condominiums and apartment buildings that require up to
100 CFM of continuous principal ventilation. With its flexible
and compact top port design incorporating the 5" oval
collars with integrated airflow measurement and wall
bracket, it can be installed in small spaces such as 24"
closets or above the hot water heater.
FEATURES
• 5" (125mm) oval duct connections with integrated airflow
measurement
• Removable screw terminal for easy connection
• Lightweight: only 39 lbs (17.7 kg) including core
• Super compact size
• Top port design fits in tight spaces
• Includes wall bracket
• Aluminum
heat recovery core
• Multiple speed operation
• Internal recirculation defrost
OPTIONAL CONTROLS:
Speed control for Normal and Reduced speed standard on unit.
Other operating modes available from optional controls below.
• Dehumidistat 1 –
Dehumidistat
• RTS20
–
20 minute timer over-ride
• RTS5
–
20/40/60 minute timer
• EDF1R
–
Triple function wall control
• DIR-TS
–
Multi-function control
• DIR-DG
–
Multi-function Dehumidistat
MOTORS:
Two (2) German-manufactured, factory-balanced
EBM motors with backward curved blades. Motors come with
permanently lubricated, sealed ball-bearings to guarantee
long life and maintenance-free operation. Covered by a seven
(7) year warranty.
HEAT RECOVERY CORE:
Aluminum
heat recovery core covered
by a limited lifetime warranty. Core dimensions are 8.5" x 8.5"
(216 x 216 mm) with a 12" (305 mm) depth. Our heat
exchangers are designed and manufactured to withstand
extreme temperature variations.
FROST PREVENTION SYSTEM:
The PHRVR100 ES
incorporates a unique and quiet internal recirculation defrost
that does not depressurize the home during the defrost cycle.
A preset defrost sequence is activated when the outdoor
temperature falls below 23° F (-5° C) and automatically
adjusts itself based on operating conditions. The fan speed is
also adjusted automatically to provide a smooth and quiet
transition between Ventilation & Defrost mode.
SERVICEABILITY:
All serviceable internal components, including
core, filters, motors and electronic board are easily accessible
and can be fully removed in under 5 minutes for complete
service. A 12" (305 mm) clearance from the front of the unit is
recommended to fully remove the core and other internal
components.
DUCT CONNECTIONS:
5" (125mm) Oval plastic duct
connections with integrated balancing damper and airflow
measurement ports.
CASE:
24 gauge galvanized steel. Baked powder-coated paint
for a superior adhesion and resistance.
INSULATION:
Cabinet is fully insulated with 1" (25 mm) high
density expanded polystyrene.
FILTERS:
Two (2) washable electrostatic panel type air filters,
8.5" (216mm) x 12.5" (318 mm) x 0.125" (3mm).
DRAIN:
1/2" (13mm) OD (outside diameter) drain spout
provided, entire bottom of unit covered by drain pan.
WARRANTY:
Limited lifetime on aluminum core, 7 year on
motors, and 5 year on parts.
PHRVR100 ES
Heat Recovery Ventilator
