60
www.SecurityCamerasDirect.com
SECTION 7: DVR SYSTEM MENUS
DST
: Daylight saving time. ON means DST clock change is enabled. You can setup the start time and end time of DST. For
example, in the right figure above, the start time is at 02:00:00 Sunday of the first week on January. Similarly, setup the end
time.
Note
: After changing settings, click the “check” (save) button in the lower right corner of the screen.
7.2.4 User management
Click
User
[
System settings
->
System
->
User
] to open the user management setup menu. This menu allows user to set the
device ID for the DVR and to change the system password. After turning on password and clicking the “check” button in the lower
right corner of the window, exit the system and login again to manage other users.
DEVICE ID
: Set Number to identify device. The default name is “000000”
PASSWORD
: Change the password. The following settings can be configured only by a user with administrative privileges.
ADD USERS
: To add new user, enter a new username and password. Password must be entered in both the Password
and Confirm Password fields. Password cannot exceed 6 digits.
