Using eight
(8)
M6x12
screws
(G)
attach the
Back Assembly
(2)
as unpacked from
carton 1 of 3 and
attach to the left and
right assemblies
(3)
as shown in Figure 3.
2.0
F
EATURES
This high-performance DirectConnect
®
Professional Series Racks have many
benefits and features that enable it to perform in a superior manner. Among those
benefits and features you will find:
Quick and easy to assemble design allows for flat shipment
1U Digital Thermal Controller
(LCD display menu)
and top loaded dual 5” Cooling Fans
1U 6 outlet Power Distribution Strip with protected on/off switch and long ground power cord
Adjustable numbered 2.5mm
(11gauge)
heavy duty threaded
(2)
and square knockout
(2)
mounting rails to fit virtually any piece of 19” equipment.
Robust locking
(2)
six screw heavy duty caster system
Four adjustable
(one in each corner of base)
heavy duty locking feet
Removable Cable Knockouts on rack’s top and bottom
Heavy-gauge steel tops & bottoms, seamless steel sides, and rails
Locking, removable, & reversible custom designed tempered glass front door
Locking, removable, & reversible vented rear door
Heavy duty and durable black textured powder coat finish
Cable channel molding option between rails and doors for 2” x 2” PVC” cable management
19” equipment width rail size for the 29U, 38U, and 42U racks
29U
Rack Dimensions:
(H x W x D)
57.5” x 23.75” x 23.75”
(1,460.5 x 603.3 x 603.3mm)
38U
Rack Dimensions:
(H x W x D)
70.86” x 23.75” x 23.75”
(1,860.5 x 603.3 x 603.3mm)
42U
Rack Dimensions:
(H x W x D)
78.75” x 23.75” x 23.75”
(2,057.4 x 603.3 x 603.3mm)
3.0
P
ACKAGE
C
ONTENTS
Before attempting to use these DirectConnect
®
Professional Series Racks, please check the
packaging and make sure the following items are contained in the shipping carton:
(Total of 3 cartons)
Front, back, and two (2) side assemblies
Top assembly with dual fans
Two (2) left and two (2) right mounting rails
Base assembly
1U digital thermal controller
Four (4) base cable plates
1U 6 outlet power distribution strip
Power cord for PDU strip
Adjustable locking feet – four (4)
Four (4) locking casters
DirectConnect
®
User's Manual
Keys –two (2) sets of two (2)
42 - M5x10mm bolts
for assembly
42 -
M6x12mm bolts
for assembly
38 – 10-32 bolts
for mounting rails
Note:
Please retain the original packing material in case you need to return the unit. If you
find any items missing, contact DirectConnect
®
immediately (800.531.3224). Please have
the model number, serial number, and invoice available for reference when you call.
I
MPORTANT:
For optimum performance and safety, please read these instructions carefully before
assembling, operating, or adjusting this product. Please keep this manual for future reference. If you
don't understand correct installation instructions, please consult your regular installation specialist
*DirectConnect
®
is a registered trademark.
4.0
I
NSTALLATION
G
UIDE
We are not responsible for any personal injury or product
damage due to mishandling, incorrect mounting,
incorrect assembly, or incorrect use of this product
C
AUTION
:
These DirectConnect
®
Professional Series Racks are intended only with
the maximum weights indicated. See apparatus instructions. Use with products heavier
than the maximum weights indicated may result in instability, causing possible injury.
Step 1
:
Unpacking Carton 2 of 3
,
removing transit parts, and side assemblies.
(Two
(2)
Side Assemblies, Left
(2)
& Right
(2)
Mounting Rails)
Remove the small mini shipping screws
(2)
opposite of side door releases on both the
left & right side of side rack assembly
(3)
to
remove side panels to start rack assembly.
Installing Left
(A)
and Right
(B)
threaded mounting rails or Left
(J)
and Right
(K)
square knockout mounting rails on Left and Right Side Assembly
Using M6x12 screws
(G)
(six
(6)
per rail)
and M6 snap nuts
(I)
(six
(6)
per rail)
attach the
left
(A)
and right
(B)
mounting rails as shown in Figure 1.
Step 2: Unpacking Carton 1 of 3
and assembly Front & Rear Assembly to sides.
Using eight
(8)
M6x12 screws
(G)
attach the Front Assembly
(1)
as unpacked from carton
1 of 3 and attach to the Left
(A or J)
and Right
(B or K)
assemblies as shown in Figure 2.
Installing the Back Assembly
(2)
to Left
(3),
Right
(3), &
Front
(1)
Assemblies
I
MPORTANT
:
Do not
force the bolt into
the hole, which may
damage equipment
and injure of person.
4 / 8
5/ 8
Fig.2
Fig.3
