KX-2 Robot
–
User’s Manual
Peak Robotics, Inc.
4747 Centennial Blvd; Colorado Springs, CO 80919
Ph 719.598.3555,
Printed: 3/3/2021
Page
3
2.0 Warnings
2.1 Symbols: The following symbols are used in this manual.
This icon accompanies text and/or other international symbols dealing with
hazards to personnel. When present, it indicates that a potential hazard to
personal safety exists if information stated within the
"WARNING
" paragraph
is not adhered to or procedures are executed incorrectly.
This icon accompanies text and/or other international symbols dealing with
potential damage to equipment. When present, it indicates that there is a
potential danger of equipment damage, software program failure or that a loss
of data may occur if information stated within the
"CAUTION
" paragraph is
not adhered to or procedures are executed incorrectly.
HIGH VOLTAGE
This icon accompanies text and/or other international symbols indicating that a
potential hazard to personal safety exists from a high voltage source. In this
document, the
"WARNING
" icon will accompany this symbol. To reduce risk
of electrical shock, all high-voltage devices employ a three-wire electrical
cable and plug to connect the equipment to earth ground.
Ensure that the wall outlet receptacle is wired properly, and
earth grounded.
DO NOT use a three-to-two wire plug adapter.
DO NOT use a two-wire extension cord or a two-wire multiple-outlet
power strip.
Disconnect power to the system before performing maintenance.
DO NOT remove any panels; panels should be removed only by qualified
service personnel.
SHARP OBJECTS/MOVING PARTS
This icon accompanies text and/or other international symbols dealing with
hazards to personnel from unblunted corners or other appendages on the
outside or inside of the equipment. In this document, the
"WARNING"
icon
will accompany this symbol.
To avoid injury due to moving parts, observe the following:
Keep loose clothing and hair away from moving parts.
Never attempt to physically restrict movement of
moving parts.
Summary of Contents for PEAKROBOTICS KX-2
Page 2: ......
