Using the remote start
➤
Before using your Remote Start
Read this user guide, including the Warnings section at the begin-
ning.
Ensure that the vehicle is parked in the open air and not in a garage.
To use your remote start to pre-warm or pre-cool your vehicle, remember
to set the climate controls to the desired settings before shutting off the
engine.
➤
Remote starting your vehicle
AUX
•
Press the
button on the remote control. The vehicle parking
lights flash.
•
On the 2-way remote, the Remote Start indicator appears and
ascending Remote Start tone plays.
The preset remote start run time is 12 minutes. This can be changed to
between 12 and 60 minutes (see your authorized dealer for
programming changes).
Your system has a feature (if programmed on) that will automatically
notify you when the run time is running low. When 9 minutes (of the 12
minute default) runtime has elapsed, the system sends the 2-way remote control
a paging signal.
➤
Points to remember
If the hood is open or is the brake pedal is pressed, the vehicle will not
start using remote start. The remote starter shuts down:
•
When the brake pedal is pressed
•
The hood is opened
30
© 2008 Directed Electronics. All rights reserved.
