6
AF-RFK722 (2-way remote)
COMMAND
Engine
status
Step
Remote sound
confirmation
Unlock
ON
Press and hold until the
remote beep once
Start melody
Start
OFF
Press and hold until the
remote beep once
Start melody
Stop
ON
Press and hold until the
remote beep twice
Shutdown melody
Note:
UNLOCK command is only available if the engine is running under a remote start.
THE START / STOP COMMAND
(FOR REMOTE-START CAPABLE SYSTEMS ONLY)
START
To start the engine, press the
button. Refer to COMMAND section in this guide for more
details.
U
PON ENTERING YOUR VEHICLE
...
DO NOT TURN IGNITION KEY TO START
POSITION
To avoid turning the engine off when taking place behind the steering wheel, do not apply the
brakes until you have placed the key in the ignition and turned it to the RUN position.
Drive off as usual.
STOP
When engine is running remotely, you can stop it by pressing the
button for more than
4 seconds. Refer to COMMAND section in this guide for more details.
SAFETY CHECKS
In order to maintain a high safety standard, proceed with the following checks every month.
HOOD SWITCH
Do the following test if your vehicle is equipped with a hood pin safety switch:
Remote start your vehicle.
Open the hood.
The engine should stop as soon as the hood is opened.
GEARSHIFT CHECK APPLICABLE TO AUTOMATIC TRANSMISSION VEHICLES
If the key
must
be in the ignition for the gearshift to be moved out of “
P
” (Park), your vehicle is safe
as long as keys are kept away from children.
If, on the other hand, the gearshift can be put in gear without the key being in the ignition, proceed
with this simple check.
Make sure that the parking brake is applied.
Put the gearshift in gear (
D
).
