Page 12
Feature & Option List
It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page
on www.xpresskit.com. The web offers more options such as EIPS and RSR; however, a manual configuration of the features is
possible using the information on this page.
Feat.
Operation
Flashes/Option
Description
1. No RF Output*
Module is connected to a remote starter using a standard installation.
2. RFTD Output
Module is connected to an XL202 using an RSR or RXT installation (when available).
3. SmartStart
Module is connected to SmartStart using an RSR or RXT installation (when available).
1. Driver priority*
Unlocks only the driver door on first press and unlocks all doors on a second press within 5 seconds.
2. All
Unlocks all doors on first press.
1. Disabled*
N/A
2. Windows Only
N/A
3. Windows and sunroof **
N/A
1. Disabled*
No operation.
2. Enabled
It will activate the Heated Seats Control feature (see feature #5).
1. 32 °F (0 °C)*
When feature #4 is enabled, it will activate the heated seats upon remote start when temperature is below
32 °F (0 °C).
2. 23 °F (-5 °C)
When feature #4 is enabled, it will activate the heated seats upon remote start when temperature is below
23 °F (-5 °C).
3. 41 °F (5 °C)
When feature #4 is enabled, it will activate the heated seats upon remote start when temperature is below
41 °F (5 °C).
4. Always ON
When feature #4 is enabled, it will activate the heated seats at any temperature.
1. Disabled*
No operation.
2. Ignition
Locks all doors when ignition is ON. Unlocks all doors when ignition turns OFF.
3. Brake
Locks all doors when brake pedal is pressed while the vehicle is running. Unlocks all doors when ignition
turns OFF.
4. Speed
Locks all doors when the vehicle is moving. Unlocks all doors when ignition turns OFF.
1. Disabled
The OEM alarm will not be controlled by DBALL upon remote start. No disarm or arm command will be
executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.
2. Safelock
Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at
the beginning of the sequence, and relock after start and shutdown.
3. Enabled*
Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the vehicle
in the remote start sequence, only when required. The reason for this is, factory alarm control must often be
done by lock or unlock operation. This could create unnecessary actions on door lock modules, such as the
horn to honk. When possible, Smart OEM Alarm Control will monitor the alarm and door lock status to
detect if the disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the
disarm/rearm will not be executed. Smart OEM Alarm Control will also monitor the remote starter actions so
that the factory alarm control is not done twice. A remote starter, for which the Safelock feature is active,
will work perfectly with this option and will make it invisible to the user.
5
Heated Seats Control
4
Heated Seats
** Do not use in vehicles without sunroof
6
* Default Option
Smart OEM Alarm
Control
7
Automatic Controlled
Door Lock
3
Automatic Comfort
Closure with Lock
RFTD Output Type
1
Unlock Driver Priority
2
Rev.: 20130304
Platform: DBALL
Firmware: GM10 v. 2.08+
© 2012 Directed. All rights reserved.
