© 2003 Directed Electronics, Inc. Vista, CA
37
Learn Routine will be exited if:
■
Door is closed.
■
Ignition is turned off.
■
Program switch is pressed too many times.
■
More than 15 seconds between steps.
transmitter configurations
The transmitters can be programmed with the standard or single button arm/disarm configurations by using the
Auto Learn functions in the Transmitter/Receiver Learn Routine.
A remote that uses the standard configuration operates similarly to many factory keyless entry remotes. A stan-
dard configuration transmitter allows arming, disarming, and Panic Mode activation with separate buttons. When
programmed for standard configuration, the transmitter buttons are assigned to the following functions:
.................................operates ...........................Arm/Lock,
Panic ON/Panic OFF
.................................operates ...........................Disarm/Unlock/
panic off
.................................operates ...........................Remote start
...............................operates ...........................Channel 2—trunk
release
and ................operate............................Timer
Mode
and ..............operate
..........................Short
Run/Turbo
timer
and ..............operate............................Channel
4
and ..............operate............................Channel
5
The standard configuration also allows the user to utilize Multi-Level Security Arming (described in the follow-
ing section).
standard configuration
