43
Unplug DIRECTV HD DVR PRO for a few minutes, then plug back in. If this happens frequently, the voltage in
your house may be abnormally high or low.
Consider using a surge protector or line conditioner.
If your TV turns off while playing, and other lights/appliances in your house do too, you may have blown a circuit
breaker or be experiencing a power outage.
Consult an electrician if the problem is frequent or severe, especially if other household appliances or electronics
are affected.
DIRECTV HD DVR PRO turns on or changes channels unexpectedly
An autorecord may have been activated. See page 20.
Your TV’s
timer may have been activated.
Check your TV owner’s manual.
Blank screen
Check that all components connected to the input
jacks are turned on.
Try another channel.
Your DIRECTV HD DVR PRO may be hooked up incorrectly to the TV. Press the INFO button on the
front
panel of the DIRECTV HD DVR PRO to see if the channel banner appears. If it does not, check the Setup and
Connections section for instructions about connecting your satellite receiver.
Press the TV INPUT key on the remote to make sure your TV input is set to the TV input your DIRECTV HD
DVR PRO is connected to.
Press the POWER button on the front of the DIRECTV HD DVR PRO .
Press the red RESET button behind the door on the
front panel of the DIRECTV HD DVR PRO .
HR21P Book.indb 43
HR21P Book.indb 43
11/5/07 4:04:46 PM
11/5/07 4:04:46 PM