12
3.
Using the number keys, enter
9-9-3
.
(The green light
flashes twice.)
4.
Press and release the
SELECT
key. (The green light
flashes twice.)
NOTE:
DIRECTV
®
Receivers don’t have volume control,
so the remote will not allow the user to lock vol-
ume to the DIRECTV mode.
ACTIVATING AND DEACTIVATING THE RF
TRANSMITTER
Your DIRECTV Remote Control features RF (radio
frequency) capability. When you activate the RF feature of
your remote control, you can control your DIRECTV
Receiver from anywhere in your home. You do not need to
be within the line of sight of your receiver to control it.
NOTE:
Not all DIRECTV Receivers are RF-capable. Also,
some RF-capable DIRECTV Receivers include integrated
RF antennas and do not require an external antenna. If
your receiver requires the external RF antenna, before
activating the RF transmitter, locate the RF antenna
included with your remote control and insert it into the RF
remote antenna coaxial connector on the back of your
DIRECTV Receiver.
Activating the RF Transmitter
To activate the RF transmitter on your DIRECTV Remote
Control, perform the following steps:
1. Locate the 12 digit Receiver ID (RID) number of your
DIRECTV Receiver. You can find the RID number on
the back panel of your receiver, or inside the CAM
access door next to the reset button.
2. Write down the last six digits of the RID number.
3. Slide the mode switch to
DIRECTV
,
AV1
, or
AV2
.
4. Press and hold the
MUTE
and
SELECT
keys until the
green light under the selected switch flashes twice and
release both keys.
5. Using the number keys, enter
9 6 1
.
(The green light
flashes twice.)
6. Press and release
CHAN
S
. (The green light flashes
twice.)
7. Using the
NUMBER
keys, enter the last six digits of the
RID number. (See step 2 above.)
8. Press and release the
SELECT
key. (The green light
flashes twice.)
Deactivating the RF Transmitter
To deactivate the RF transmitter on your DIRECTV Remote
Control, perform the following steps:
1. Slide the mode switch to
DIRECTV
,
AV1
, or
AV2
.
2. Press and hold the
MUTE
and
SELECT
keys until the
green light under the selected switch flashes twice and
release both keys.
3. Using the number keys, enter
9 6 1
.
(The green light
flashes twice.)
