13
4. Press and release
CHAN
T
. (The green light flashes
twice.)
The RF transmitter on your remote control is now
deactivated. To reactivate the RF transmitter, See
“Activating the RF Transmitter” above.
RESTORING FACTORY DEFAULT SETTINGS
To reset all the functions of the remote control to the
factory defaults (the original, out-of-the-box settings),
follow these steps:
1.
Press and hold the
MUTE
and
SELECT
keys at the same
time until the green light flashes twice, then release
both keys.
2.
Using the number keys, enter
9-8-1
.
(The green light
flashes 4 times.)
TROUBLESHOOTING
PROBLEM:
Light at the top of the remote blinks when you
press a key, but the component does not respond.
SOLUTION 1:
Try replacing the batteries (see page 7).
SOLUTION 2:
Make sure you are aiming the DIRECTV
®
Universal Remote Control at your home entertainment
component and that you are within 15 feet of the
component you are trying to control.
PROBLEM:
The DIRECTV Universal Remote Control does
not control component or commands are not recognized
properly.
SOLUTION:
Try all listed codes for the device brand being
set up. Make sure all components can be operated with an
infrared remote control.
PROBLEM:
TV/VCR combo does not respond properly.
SOLUTION:
Use the VCR codes for your brand. Some combo
units may require both a TV code and a VCR code for full
operation (see page 8).
PROBLEM: CHAN
S
,
CHAN
T
, and
PREV
do not work for
your RCA TV.
SOLUTION:
Due to RCA design for certain models (1983-
1987), only the original remote control will operate these
functions.
PROBLEM:
Changing channels does not work properly.
SOLUTION:
If original remote control required pressing
ENTER
to change channels, press
ENTER
on the DIRECTV
Universal remote control after entering a channel number.
PROBLEM:
Remote control does not turn on Sony or Sharp
TV/VCR Combo.
SOLUTION:
For power on, these products require setting up
TV codes on the remote control. For Sony, use TV code
10000 and VCR code 20032. For Sharp, use TV code 10093
and VCR code 20048. (See “Controlling Other
Components” on page 9.)
