8
2.
Locate the 5-digit code for your DIRECTV
®
Receiver.
(See page 13.)
3.
Power on the DIRECTV Receiver.
4.
Slide the
MODE
switch to the DIRECTV position.
5.
Press and hold the
MUTE
and
SELECT
keys until the
green light under the
DIRECTV
position flashes twice,
then release both keys.
6.
Using the number keys, enter the 5-digit code. If
performed correctly, the green light under the
DIRECTV
position flashes twice.
7.
Aim the remote at your DIRECTV Receiver and press
the
PWR
key once. The DIRECTV Receiver should
turnoff; if it does not, repeat steps 3 and 4, trying each
code for your brand until you find the correct code.
8.
For future reference, write down the working code for
your DIRECTV Receiver in the blocks below:
ONSCREEN REMOTE SETUP
Once your remote is setup to work with your DIRECTV
Receiver, you can set it up for your other equipment using
the steps detailed on the following pages, or you can set it
up onscreen by pressing
MENU
, then
SELECT
on Settings,
Setup in the Quick Menu, then selecting Remote from the
left menu.
CONTROLLING YOUR TV
Once you have successfully set up your DIRECTV Remote
to operate your DIRECTV Receiver, you can set it up to
control your TV.
We recommend you use the on-screen
steps described on page
8, but you can also use the
manual method below:
1.
Turn on the TV.
NOTE
:
Please read steps 2-5 completely before proceed-
ing. Highlight or write down the codes and com-
ponent you wish to set up before moving on to
step 2.
2.
Locate the 5-digit code for your TV. (See “
Setup
Codes for TVs
” on page 14.)
3.
Slide the
MODE
switch to the TV position.
4.
Press and hold the
MUTE
and
SELECT
keys at the same
time until the green light under the TV position
flashes twice, then release both keys.
5.
Using the number keys enter the 5-digit code for your
brand of TV. If performed correctly, the green light
under
TV
flashed twice.
6.
Aim the remote at your TV and press the
PWR
key
once. Your TV should turn off. If it does not turn off,
repeat steps 3 and 4, trying each code for your brand
until you find the correct code.
