![background image](http://html.mh-extra.com/html/dirna/bycool-dinamic-1-1/bycool-dinamic-1-1_mounting-instructions_2507786019.webp)
19
DINAMIC 1.1
dirna
, s.a.
EN
Ø35
Ø48
Ø19
Ø35
Ø48
Ø19
1
CABIN INTERIOR:
Introduce the template supplied and mark
bores.
A- If there are 2 beds, place the template
between the two.
B- If there is 1 bed, place the template on the
bed.
PRIOR OPERATIONS:
• Disconnect the battery.
• Dismount the evaporation unit cover.
2
Make through bore Ø4 with long broach
in bore position Ø48, and then make the
following bores.
A- make (1) Ø35 in the cover only
B- make (1) Ø19 in the cover only
C- make (1) Ø48 in the cover only
D- make (4) Ø22 in the cover only
1
2
ARRIBA
ARRIBA
ARRIBA
ARRIBA
3
2D
2C
2D
2A
2B