CD Reader Drive
The CD-ROM (Reader) drive can be selected manually. The default setting is
AUTO, the Reflex will select the CD-ROM drive automatically (the top drive). If you wish
to change the default Reader drive to another drive other than the top, use this setting.
Press the STATUS button to change the setting and the START button to exit.
CD-DA Load Speed
This setting allows the user to adjust the speed at which music tracks are imported to the
hard drive in the system. This may affect the quality of the individual tracks and ultimate-
ly the final compilation audio disc being created and duplicated by the system. The
default setting is AUTO, whereby the system will automatically read in the audio data at
maximum speed, unless the system detects any errors. Press the STATUS button to
change the setting and the START button to exit.
Eject Disc
This setting controls the ejection of the discs by the CD writers. Three options are
available: ALWAYS means the CD writers will always eject the CD discs whether duplica-
tion is successful or has failed. NO means all discs will remain in the CD writers when
the job is done. You will then need to eject the discs from the CD writers manually. The
PASS setting will only eject the passed discs automatically and leave the failed discs in
the CD writers. Press the STATUS switch to reject those failed CDs. Press the STATUS
button to change the setting and the START button to exit.
Buzzer
This setting controls the ON and OFF function of the system buzzer. The default
setting is ON. Press the STATUS button to change the setting and the START button
to exit.
CD+G
This setting activates the duplication capability of the CD+G format. The default
setting is NO. Press the STATUS button to change the setting and the START button to
exit.
Copy Comp Eject
This setting controls the ejection of the CD writers under the COPY + COMPARE
function. If the setting is YES, the trays will eject the recorded discs after duplicating. The
system will re-insert the same discs again for subsequent comparison. If the setting is
NO, the writers will not be ejected between COPY and COMPARE. The default setting is
AUTO, which means the ejection of the writers will take place after the initial duplication.
Press the STATUS button to change the setting and the START button to exit.
Mode 2 Compare
This setting can be activated to compare a source data format stored in a MODE 2
source disc. The default setting is NO. Press the STATUS button to change the
setting and the START button to exit.
T
www.discmakers.com
1-888-800-4041
9
