12
Counter:
Specify Counter
Specify Counter:
[0 ] OK?
Counter:
No Counter
7. Setting Counters and Assigning Names
Two frequently used tasks are setting counters and assigning names to partitions. Directions for these tasks
are given here.
7.1 Setting Counters
The autoloader frequently gives you the option to set a counter so that the machine can keep track of the
number of copies made. Follow these steps when you see a Counter Selection Menu:
The Counter Selection Menu lets you set how many copies you want to
make for your project. The Counter Selection feature tells the autoloader
to count the number of successful copies you have made and stop the job
when the desired number of copies has been reached.
You can select No Counter if you prefer to copy continuously with no interruption. (It will still count the
number of copies, but it will not notify you when to stop.) To select the No Counter , simply press the Enter
button when you see the screen above.
Or, you can select Specify Counter between 1 to 9999 by pressing the Up or Down button to go to the
Specify Counter menu:
Press the Enter button to select this option. You will see the next Specify
Counter menu.
To specify the number of copies for your project, you need to enter/input a
four-digit number.
If you need to specify a number that is less than four digits, fill the leading spaces with zeros (any leading
zeros will be skipped). Examples of four-digit numbers are 0234 (two hundred and thirty four), or 0010
(ten).
To enter the number, you need to use the Up or Down button to select the number for each digit and use
the Enter button or the ESC button to move the cursor position right or left. Once you've finished, move the
cursor to OK and press the Enter button. For example, if you want to specify a counter value of 21 (twenty
one). The 4-digit value would be 0021. To input the desired quantity, do the following:
Make sure the cursor is located at the first position (First blinking position):
Press the Down button repeatedly until 0 is displayed.
Press Enter button once to move the cursor to the next position.
Press the Down button repeatedly until 0 is displayed.
Press Enter button once to move the cursor to the next position.
Press the Down button repeatedly until 2 is displayed.
Press Enter button once to move the cursor to the next position.
Press the Down button repeatedly until 1 is displayed.
Now, 0021 is displayed, press Enter button once and the cursor moves to OK .
Specify Counter:
[0 ] OK?
