Disc Makers ReflexMax1, User Manual

Upon completion of this test the following will display on the LCD.

In this example, three discs compared successfully and one was different.
The successful disc will be ejected. 
Pressing the 

ENT

button will identify the source for the comparison and the

size of the source in MB. Pressing 

ENT

again will display the first (topmost

recorder) drive and the condition of the comparison, 

Identical

is any passed

disc. Pressing the 

ENT

button will cycle through all the recorder drives and

report the condition.
Press the 

ESC

key to return to the main menu.

The failed conditions are: 

TOC not match

, 

Cannot read TOC

, or 

Read disc

error

. 

6. P

RESCAN

The 

Prescan

function only looks at the master CD. If the ReflexMax is in 

Hard-

Drive-to-Disc

mode, the data in the partition is examined. If the 

Disc-to-Disc

mode is current, any disc in the source 

Src

drive will be examined. This is used

to verify that the master can be read correctly without errors

In the 

Hard-Drive-to-Disc

mode: Select the loaded master to analyze and press

the 

ENT

button. The unit will analyze the master on the hard drive and a mes-

sage will be displayed 

Prescan OK!

In the 

Disc-to-Disc 

mode: Load the top drive 

Src

with the master disc. Press

the 

ENT

button to start the process. The unit will analyze the master on the 

Src

drive, and then a message will be displayed regarding the results.

7. D

ISC

I

NFO

The 

Disc Info

function only looks at the master CD. To use this function, it is

necessary to change to the 

Disc-to-Disc 

mode. See Step 8 

Select Source

. It will

display the session and tracks on the CD, total time of the CD, and size of
the CD.
1. Select the 

Disc Info 

function using the 

Up and Down

arrows.

2. Load the 

Src

drive with the master disc.

3. Press the 

ENT

button to start the process. Pressing the 

Up and Down

arrow

will scan through the information.

8. S

ELECT

S

OURCE

The 

Select Source

function is used to select the mode the ReflexMax will oper-

ate under. When the 

Hard Drive

is chosen as the source 

Src

the unit will be in

Hard-Drive-to-Disc

mode. Choosing any recorder drive as the source 

Src

will

cause the unit to copy in 

Disc-to-Disc 

mode.

1. Select the function using the 

Up and Down

arrows.

2. Press the 

Up and Down

arrow to cycle through the available sources.

Typically the sources are 

Src: hard drive  ØØ   IDEØ  Master

and 

Src: CD-RW

Ø1   IDE1 Slave.

The CD-RW drives are numbered from Ø1 to Ø7 with the top

drive being Ø1 and the bottom drive being Ø7.

3. Press the 

ENT

button to select the source in view on the LCD. The display will

say the source and 

... selected!

4. Press the arrow keys to move to another function.

9. I

MAGE

The 

Image

function is used to manipulate images on the hard drive. There are

six sub functions that can be utilized.

9.01 Load:

use this sub-function to load an image of the CD master onto the

hard drive
1. Press the 

Down

arrow until you see 

9. Image

then press the 

ENT

button, you

should see 

9-01. Image    P: A  Load

.  

2. Load the top drive with the master disc and press the 

ENT

button. The mas-

ter disc will copy to the hard drive and the display will read 

Image Load OK

.

9.02 Delete Image:

use this sub-function to delete an image from the hard

drive

1-888-800-4041

www.discmakers.com

T

09

Funct

io

n

s

Compare

OK:3

Fail:1    

Diff:1